With a blade resembling the beak of a swordfish, this type of saw is commonly used for making cutouts on the inside surface of a piece of work. Compass SawĬompass saw carries a tapered blade which is one of the special saw having thin, narrow and flexible blade. This saw is used where absolutely finer and delicate cutting is required in wood work. The handle is round, to provide a delicate grip for fine cutting. It is lighter and however possesses a thinner blade and finer teeth. Dovetail Sawĭovetail saw is little and is closely similar as related to the backsaw or tennon saw. The saw generally cuts in the pulling stroke. This saw can be pivoted between the handles. The thin blade of the turning saw is removable. It is used chiefly on heavier work where long fast stroke and less accuracy of cutting are required. The turning saw is similar to the copying saw which is designed for cutting curves, scrolls and roundings on wooden jobs. A jaw for general purpose cutting should have about eight or nine points per inch (there is one more point than teeth per inch) and should be about 24 inches long. Since the kerf is wider than the blade, the blade will not stick as the sawing is done. The saw teeth may be coarse (with only 4 or 5 teeth per inch) or fine (with ten or twelve teeth per inch). The teeth are knife shaped and bent alternately to the right and left for making the saw to cut wider than the blade. It is primarily designed for cutting across the grains of wood. Crosscut SawĬross cut saw is similar to rip saw in shape. In the case of a ripsaw, the teeth are shaped like chisels. Depending upon whether the saw is designed to rip or cross-cut, the shape of the teeth will also vary. A 24″ long point saw is a good for sawing work. The teeth of rip saw are chisel-shaped and are set alternately to the right and left. It is used for cutting timber along the grains. Few important types of saws are described as under. They can be further classified into three major types namely hand Saws (Rip, Cross-cut, Panel, Keyhole and, Pad saw), Snuff Saws (Tenon and Dovetail) and Frame Saws (Coping, Bow and Fret). They are utilized to cut wood to different sizes and shapes used for making the wooden joints that hold parts together. Saws are wood cutting tools having handle and a thin steel blade with small sharp teeth along the edge. Few important types of cutting tools are described as under. Various kinds of cutting tools namely various kinds of saws, planes, chisels, scraper, files, and rasp adze and axe and boring tools such as brace and bits, bradawl, auger, gimlet are used in the carpentry shop.
0 Comments
Leave a Reply. |